29th September 2015
The flex7 ZoneLite Type T is a lighting connection & control solution in one. It comes pre-programmed with up to 15 distinct lighting configurations common to teaching and educational environments.
Offering a prefabricated alternative to traditional wiring, the ZoneLite Type T is designed for use in educational environments. It provides options for absence/presence/daylight linking/graduated daylight dimming lighting control, independent switching of whiteboard or projector lights, emergency test, corridor hold, last man out switch and scene setting.
Cost Effective
System simply plugs together, saving time on site, and reducing need for skilled electricians.
No Commissioning Required
Just choose the required configuration using the rotary selector switch on your ZoneLite
Operates at PELV
All sensor heads and switch drops operate at PELV. This allows for use of lightweight plug-in switch drops and sensor leads. In particular because flex7 switch drops operate at PELV they do not require enclosing in an earthed metallic covering nor the protection of an RCD as is often the requirement for mains switch drops.
Quick And Easy To Wire
Large wiring compartment.Remove cover with a single screw.
Global Switch Inputs
Each ZoneLite can also accept up to 3 global switch commands:
(Global switch inputs are typically connected to a group of ZoneLites).
Corridor Hold
Interlinking corridor hold between a group of ZoneLites allows circulation areas and exit routes to be illuminated when outlying spaces are occupied.
Zonelite Control Units are available with 4,12,16 or 20 outlets. These are configured into groups to be controlled by up to 4 individual channels. Each unit comes as standard with 4 PELV miniature sensor head ports, 4 PELV switch drop ports and 1 PELV network port.
Click here for more information: http://www.flexconnectors.co.uk/zonelite.
back to Trade Newsfollow us |
© MIDA International Ltd 2011 |
Privacy Policy | Site by Adventure |
